cph5504 no.6793-1/4 applications ? dc-dc converter, relay drivers, lamp drivers, motor drivers, flash. features ? composite type with 2 npn transistors in one package facilitating high-density mounting. ? the cph5504 is composed of 2 chips each equivaient to the cph3205. ? ultrasmall package facilitates miniaturization in end products. (mounting height : 0.9mm) specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo 100 v collector-to-emitter voltage v ces 100 v collector-to-emitter voltage v ceo 50 v emitter-to-base voltage v ebo 6v collector current i c 3a collector current (pulse) i cp 6a base current i b 600 ma collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 0.9 w total power dissipation p t mounted on a ceramic board (600mm 2 5 0.8mm) 1.2 w junction temperature tj 150 c storage temperature tstg -55 to +15 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =40v, i e =0a 1 m a emitter cutoff current i ebo v eb =4v, i c =0a 1 m a dc current gain h fe 1v ce =2v, i c =100ma 200 560 h fe 2v ce =2v, i c =3a 70 gain-bandwidth product f t v ce =10v, i c =500ma 380 mhz output capacitance cob v cb =10v, f=1mhz 13 pf collector-to-emitter saturation voltage v ce (sat) i c =1a, i b =50ma 80 120 mv i c =2a, i b =100ma 140 210 mv base-to-emitter saturation voltage v be (sat) i c =2a, i b =100ma 0.88 1.2 v marking : ed continued on next page. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn6793a 62005ea ms im tb-00001409 / 21401 ts im ta-2946 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. cph5504 npn epitaxial planar silicon transistor high-current switching applications
cph5504 no.6793-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit collector-to-base breakdown voltage v (br)cbo i c =10 m a, i e =0a 100 v collector-to-base breakdown voltage v (br)ces i c =100 m a, r be = 0 w 100 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 50 v emitter-to-base breakdown voltage v (br)ebo i e =10 m a, i c =0a 6 v turn-on time t on see specified test circuit. 35 ns storage time t stg see specified test circuit. 300 ns fall time t f see specified test circuit. 22 ns package dimensions switching time test circuit unit : mm 7017-003 electrical connection 2.9 0.95 0.05 12 3 4 5 0.2 0.7 0.9 2.8 1.6 0.6 0.6 0.2 0.4 0.15 1 : collector 2 : collector 3 : base 4 : emitter common 5 : base sanyo : cph5 + + 50 w input output v r r b r l v cc =25v 100 m f 470 m f v be = --5v pw=20 m s i b1 i b2 d.c. 1% 10i b1 = --10i b2 =i c =1a 0 i c -- v ce 0 0.4 0.8 1.2 1.6 2.0 i b =0ma collector-to-emitter voltage, v ce -- v collector current, i c -- a 1.0 1.5 0.5 2.5 3.0 2.0 4.5 5.0 4.0 3.5 base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a 3.0 1.5 1.0 2.5 2.0 0.5 0 0 0.2 0.4 0.6 0.8 1.0 --25 c v ce =2v ta=75 c 25 c it02464 it02465 80ma 100ma 5.0ma 20ma 10ma 40ma 60ma 54 3 12 1 : collector 2 : collector 3 : base 4 : emitter common 5 : base top view
cph5504 no.6793-3/4 collector current, i c -- a v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- mv 23 57 23 57 0.01 0.1 23 5 1.0 10 100 7 5 3 2 1000 7 5 3 2 it02469 --25 c ta=75 c 25 c collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 23 57 23 57 7 0.1 1.0 23 5 10 10 7 5 3 2 100 7 5 3 2 it02468 collector current, i c -- a v ce (sat) -- i c collector-to-emitter saturation voltage, v ce (sat) -- mv 10 100 0.01 0.1 2 0.01 0.1 23 57 1.0 23 5 23 5 7 357 1.0 23 5 23 5 7 7 5 3 2 1000 7 5 3 2 f=1mhz collector current, i c -- a v be (sat) -- i c base-to-emitter saturation voltage, v be (sat) -- mv 100 1000 7 5 3 2 5 3 2 it02470 it02471 ambient temperature, ta -- c p c -- ta collector dissipation, p c -- w 0 0.2 0.4 0.6 0.8 0.9 1.0 1.2 1.4 0 20 40 60 80 100 120 140 160 collector-to-emitter voltage, v ce -- v a s o collector current, i c -- a 2 3 5 7 0.01 0.1 2 3 5 7 1.0 2 3 5 7 10 23 57 23 57 23 57 0.1 1.0 10 dc operation 10ms i cp =6a i c =3a it02472 it02473 1ms 100ms i c / i b =20 i c / i b =50 --25 c ta=75 c 25 c i c / i b =50 ta= --25 c 75 c 25 c 100 m s 500 m s ta=25 c single pulse mounted on a ceramic board (600mm 2 5 0.8mm) 1unit total dissipation 1unit mounted on a ceramic board (600mm 2 5 0.8mm) collector current, i c -- a h fe -- i c dc current gain, h fe 10 100 23 57 0.01 0.1 23 57 23 1.0 2 3 5 7 1000 2 3 5 7 --25 c ta=75 c it02466 collector current, i c -- a f t -- i c gain bandwidth product, f t -- mhz 100 5 7 3 2 1000 5 7 3 2 23 57 23 57 0.01 0.1 23 5 1.0 it02467 v ce =10v v ce =2v 25 c
cph5504 no.6793-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of june, 2005. specifications and information herein are subject to change without notice. ps collector dissipation, p c (tr1) -- w p c (tr2) -- p c (tr1) collector dissipation, p c (tr2) -- w 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 it02474 mounted on a ceramic board (600mm 2 5 0.8mm)
|
